ProPlus adapter cable for trailer hitch socket 7/13 PIN 80cm
ProPlus adapter cable for trailer hitch socket 7/13 PIN 80cm
The 80 cm ProPlus adapter cable is a practical solution that combines the functions of an adapter and an extension cord. It allows you to effortlessly connect a modern trailer, flatbed truck, or bike rack with a 13-pin plug to an older 7-pin socket in your car . Using a flexible cable section instead of a traditional, rigid block adapter eliminates stress on the towbar socket and significantly simplifies cable management.
Key features and parameters:
- length 80 cm: the optimal cable length allows for free and safe connection of the vehicle's electrical system with the trailer, eliminating the risk of the cable being torn off during sharp turns;
- reduction of standards (13 - 7 pin): enables powering of the basic trailer lighting (turn signals, position lights, brake lights, fog light) from a modern 13-pin socket;
- solid wire construction (7 x 0.5 mm²): internal wires with a cross-section of 0.5 mm² ensure optimal current conduction and stable operation of all signal lights at a voltage of 12V;
- Durable materials: plugs and connector housings are made of hard, impact-resistant plastic, and flexible cable insulation protects it from abrasion and weather conditions.
Supported lighting features
position light 
signpost 
brake light 
fog lightThe cable supports lighting functions: left/right position light , which ensures the vehicle is visible when driving at night; left/right turn signal , which allows you to indicate your intention to turn; brake light , which signals braking; and fog light , which increases safety in difficult weather conditions, such as fog or heavy rainfall.
Meaning of wire colors in the 7 PIN plug
- (1) yellow - left turn signal
- (2) blue - left fog light
- (3) white - mass
- (4) green - right turn signal
- (5) brown right side light
- (6) red - brake light
- (7) black - left position light
UNITRAILER will be responsible for collecting VAT on orders below £135 being sold to the UK. For all orders with
a total value exceeding £135, the following shall apply: the UK buyer is regarded as the importer. Import VAT applies
at the UK border and is borne by the UK buyer. VAT registered importers in the UK have to justify the import VAT on
their periodic VAT returns using a VAT reverse charge mechanism. Importers not registered for VAT must declare and pay
import VAT as part of the customs processes.
