AHAKA towbar with ball height adjustment 50mm 3500kg

AHAKA towbar with ball height adjustment and slack resetting function

The AHAKA towbar is designed for vehicles equipped with a square mounting socket located at a height of 260 to 442 mm above the ground. It allows the towing ball to be installed at three different heights: +90 mm, +34 mm and -22 mm , measured from the center of the ball to the center of the mounting hole.

This is an ideal solution for vehicles that often carry loads and those with air suspension. The adapter is mounted in the socket using the screws included in the set, which ensures stability and eliminates movements and knocking during towing.

The towbar is characterized by high durability, with a maximum towing capacity of 3,500 kg and a maximum vertical load of 210 kg . Thanks to these parameters, it is able to tow all European trailers, including those equipped with track stabilizers.

The adapter has European approval and allows the installation of tow balls with a hole spacing of 90 mm and 83x56 mm . It can be installed in most vehicles imported from the USA. To properly select the adapter for your vehicle, measure the height from the ground to the center of the adapter socket and the dimensions of the square mounting socket. It is important that the center height of the towbar ball, in accordance with the European standard, is between 35 cm and 42 cm.

Set includes:

• Towbar
• Flange ball with a hole spacing of 90 mm (black, powder coated)
• Screw set for mounting the ball in the hook
• Screws for mounting the hook in the socket
• Installation instructions

Specification:

• Maximum towing capacity: 3,500 kg
• Size: 2 inches (approx. 51 mm x 51 mm)
• Maximum vertical pressure: 210 kg
• Height adjustment
• Force value: 17.20 kN
• Reduction of knocking noises while driving
• Approval
• Ball size: 50 mm
• For sockets at height: 260-442 mm
• Ball center height: +90 mm / +34 mm / -22 mm
• Compatible with AL-KO hitch