Manual winch for AL-KO 1150kg trailer with 12.5m belt, brake and automatic unwinding
Winch with brake 1201 PLUS A with automatic unwinding and 12.5 m belt
Manual, crank winch 1201 PLUS A by AL-KO with a maximum vertical pull of 1150 kg, equipped with a 12.5-meter belt and a removable crank. It has an automatic unwinding mechanism that secures the load during lifting, pulling and lowering thanks to the use of an automatic load pressure brake. The surface is protected against corrosion by a zinc-nickel coating and includes a plastic gear cover.
The winch can be used in boat trailers, car trailers, agricultural machinery or as mobile lifting equipment. Using it allows for efficient and economic management of tasks that would otherwise require much greater effort and resources. It meets the requirements of the European standard EN 13157, the CE directive and the machinery directive.
Capstan parameters:
- Maximum vertical pull 1150 kg
- Minimum load 25 kg
- Reduction gear: 10.5:1
- Drum capacity: 12.5 m
- Permissible ambient temperature: -20°C to +50°C
Winch operation:
- To raise: turn the crank clockwise.
- Hold: release the crank in any position - the load will be held in a fixed position.
- Lowering: turn the crank counterclockwise.
Operation of the automatic unwinding mechanism:
- To unwind the belt (without weight), pull the locking sleeve.
- Then remove the crank.
- Press the locking system and turn it to the left
UNITRAILER will be responsible for collecting VAT on orders below £135 being sold to the UK. For all orders with
a total value exceeding £135, the following shall apply: the UK buyer is regarded as the importer. Import VAT applies
at the UK border and is borne by the UK buyer. VAT registered importers in the UK have to justify the import VAT on
their periodic VAT returns using a VAT reverse charge mechanism. Importers not registered for VAT must declare and pay
import VAT as part of the customs processes.
