Cast-iron ball coupling AK301 3000kg fi 50 mm
Cast-iron ball coupling AK301 3000kg fi 50 mm
The AL-KO AK301 ball coupling is equipped with coupling and wear indicators.
The ball coupling has three mounting holes - two horizontal and one vertical. Thanks to the mounting holes, it is possible to attach the ball coupling to the vast majority of overrun brake devices. The diameter of the mounting holes is 12 mm. The spacing between them is equal to 55 mm for horizontal holes and 40 mm between the vertical and horizontal holes. The diameter of the pipe onto which the ball coupling is attached is 50 mm. The maximum allowable load on the coupling point: 325 kg The ball coupling has been additionally equipped with a wear indicator and a hole for a barrel lock.
Technical parameters:
- Mounting hole diameter: 50 mm
- To be assembled with M12 bolts - 2x horizonally and 1x vertically
- Distance between mounting holes: 55 and 40 mm
- The maximum allowable pressure which can be exerted on the ball of the hook: 325 kg
- Wear indicator: included
It is possible to assemble the ball coupling AK301 onto the following AL-KO overrun devices: 251S, 251VB 1500-2700 kg or 251G 1500-3000 kg.
UNITRAILER will be responsible for collecting VAT on orders below £135 being sold to the UK. For all orders with
a total value exceeding £135, the following shall apply: the UK buyer is regarded as the importer. Import VAT applies
at the UK border and is borne by the UK buyer. VAT registered importers in the UK have to justify the import VAT on
their periodic VAT returns using a VAT reverse charge mechanism. Importers not registered for VAT must declare and pay
import VAT as part of the customs processes.
